TechNews

A Simple Guide To Troubleshooting Your Robotic Pool Cleaner

0

One of the best ways to enhance the aesthetic of your outdoor area is to ensure your pool maintains its pristine appearance. However, ensuring the cleanliness of your backyard pool is not an easy job. Thankfully, you can rely on your robotic pool cleaner to make the entire process easy and hassle-free.

Robot pool cleaners are known for being reliable, efficient, and low maintenance. But like with any cleaning gadgets, you may encounter some problems at some point. So in this article, we’ll share with you some troubleshooting tips you can consider when your robot is not functioning properly.

Robot Pool Cleaner Troubleshooting Checklist

When your robotic cleaner stops running, you can try DIY troubleshooting it. But if you’ve exhausted all your efforts to no avail, then it’s time to contact the help of a professional from your local swimming pool shop.

With that in mind, here’s a checklist you can go through that can help get your robot up and running again.

  1. Connection

When your robot cleaner suddenly freezes while it’s cleaning your pool, one of the first things you need to check is if its power cable is still connected.

The cord can get tangled easily while the robot is at work, especially if it’s not the swivel type. This puts pressure on the cable, which may pull it out of your outlet. So make sure to give the cord adequate slack so that your cleaner can maneuver around the entire length of your swimming pool.

But if the power is not disconnected and your unit is still not functioning, double-check and ensure that the outlet is working properly.

  1. Filter

Automatic robot cleaners come with their own self-contained filter. The majority of these devices can vacuum finer particles and have powerful traction, which makes them quite efficient. Likewise, using one allows you to save time, effort, and money.

When you notice that your robotic pool cleaner is having a hard time sucking up debris, check its filter. Removing, rinsing, and reinstalling most filter bags is fast and simple. But remember to unplug your device first before checking its filter. Also, make sure to read the user’s manual for any filter requirements, as well as extra information to ensure proper installation.

  1. Belts and Motors

You may need to check the motor of your robot if it’s still not functioning after checking the connection and cleaning the filter. You’ll know that there’s nothing wrong with the pump if there’s water coming out of the top part of your unit while it’s on and submerged partially.

Next, it’s time to check its belts. Ensure that both the cleaner’s wheels and belts are correctly seated. Your robot may not move around well if one of its belts has slid off the tracks.

Once you’ve checked that these are in the right places, move on to the drive pulley. This component is usually located inside the robot’s motor. Check to see if some parts of it need replacement. Again, make sure to carefully read the user’s manual to know what your next steps should be.

  1. Water Pump

You need to check your robot cleaner’s impeller or fan if there’s no water pouring out of the top of the pump. Fan getting clogged with particles is one of the most common problems of these pool cleaning gadgets.

So when you notice this issue, remove your robot from the water and turn it off. Next, unscrew its impeller cover so you can access the unit’s fan. Then, get rid of any filth inside the cover. Once you’ve cleared out all debris, reassemble your robot’s panel and let it continue its task.

Why Is My Robotic Pool Cleaner Not Climbing The Pool Walls?

Is your robotic cleaner getting stuck at the bottom of your pool instead of climbing the walls as it should? The problem may be algae buildup in your pool making its walls slippery.

If algae are starting to become a problem, then you need to treat it first before letting your robot pool cleaner do its job. Furthermore, this is a good time to check its brushes and ensure that they’re in good shape.

What To Do When DIY Troubleshooting Can’t Fix An Issue

The DIY solutions here are quite simple and can take care of most common robot pool cleaner issues. A bit of adjustment to your equipment’s mechanism or a little cleaning of its filter can make it work again.

However, certain problems need further attention or the help of a professional. If the motor or parts like brushes and pump are damaged, you need to replace it right away. Also, if there are faults you cannot replace or fix, it may be time to get a new robot entirely.

Depending on the manufacturer, they can replace parts or the unit itself if covered by the warranty. The company may also offer further customer support if the issue is bigger.

But if the problem is no longer covered by the warranty, you may need to buy a new one. If that’s the case, make sure to check out this article first on how to choose the best robot pool cleaner. The last thing you want is to end up with something that doesn’t meet your cleaning requirements.

Final Words

As sophisticated as robot pool cleaners are, these machines can be a bit moody at times. All automatic cleaners may likely develop a fault or two over time, whether you own the most complex model out there. Still, you and your robot will have a long-lasting relationship with the help of this troubleshooting guide.

Raj Hirvate
Hi, I'm Raj Hirvate and I am a Tech Blogger from India. I like to post about technology and product reviews to the readers of my blog. Apart from blogging i'm a big Anime fan I Love Watching Naruto, One piece and Death Note.

A Simple Guide to Starting an Awesome Gaming Blog in 2020

Previous article

How to Choose DevOps Consulting Company?

Next article

You may also like