The little drip, drip, drip of a faucet can be one of the most annoying things especially when you go to your bathroom to attain comfort. However, with all the irritation there is one good news that you can fix that yourself as well.
A lot of people tend to leave the problem up to a plumber and in all the wait to find the right contractor for the job, they don’t realize that one leaky faucet releases 10 drops of water every minute and if we sum that up for a year than you actually lose 300 gallons of water annually with that one mistake. So, while you can fix the problem with the tips mentioned below, what’s the wait for?
Step 1 – Arrange the Tools You Need
If you have decided to take on the job of doing the faucet repair services yourself in North Charleston SC then the first thing you need to take care of is arranging the tools. Typically, in order to fix the leaking faucet you have to replace the washer or seat assembly which can only be made possible with the help of a flat-head screwdriver, an adjustable wrench, replacement washers, and O-rings, along with penetrating oil like WD-40. The best part about the tools associated to such working is that they are easily available on any local hardware store and you can buy them at cheaper rates as well.
Step 2 – Don’t Forget to Turn Off the Tap
As soon as you are done collecting the tools and you are now near to the faucets, you shouldn’t begin opening it as the next step. This is because before you do that, you need to make sure that the tap is turned off completely from the back as well. In fact if we were to explain the significance of this step then it is one of the biggest mistakes a person can make in the DIY faucet repair process as water from sink starts spraying all over the room and them alongside leaky faucet you then also have to deal with possible water damage as well.
Hence, if you want the job to be done quickly and without water going around in the entire house with one little mistake, make sure that the Tao is turned off.
Step 3 – Replacing the Broken or Loose Parts
Cleanup of Aerator
When it comes to the beginning of identifying the problem with leaky faucet, then a dirty aerator can also be the reason behind it. You should check the aerator thoroughly to confirm if there are any particles surrounding it and if there is any then clean it up to see whether the leakage is fixed or not. Also don’t forget to firmly tighten the nozzle afterwards.
Replacing the Washer
When you turn off the faucet, the washer falls off that sits against the faucet seat and then seals of the flow of water as well. So, if the washer for any reason is moving then that can be another reason behind the leakage. You can first try to reposition the washer but if that isn’t working and the leakage remains then you may have to replace the washer.
It doesn’t matter if your faucet is based on cartridge or compression models, O-rings exist around the handles to keep the waterproof seal intact. If the O-ring becomes damaged or loose, the seal can also break up causing the leakage.
Another pro-tip here to remember is that if the handle is leaking then the problem definitely is with the O-ring and needs to be replaced with the new one.
You can easily identify a cartridge handle based on its one or two handles and especially how they feel while operating – as the handles are a bit smoother than the compression one. If the cartridge faucet is dripping, it becomes important that you replace the entire cartridge valve which will only cost you $10-$15.
As what we have mentioned above are the basic leakage reasons that you can always fix on your own, in case if the situation becomes too hard for you to handle, then it is advisable to not touch anything more and call the expert.