Dream11 Points System: Batting, Bowling and Fielding

The Dream11 points system turns a cricketer’s scorecard contributions into fantasy points. Runs, boundaries, wickets, dot balls, catches, stumpings and run-outs all matter, while captain and vice-captain selections multiply a player’s final total. The exact scoring table changes by format, so a useful approach is to understand the core categories first and then read the applicable match-format rules before assessing player performances.

The basic structure of fantasy points

Dream11’s cricket scoring is built around four areas: batting, bowling, fielding and additional match participation points. A player can score in more than one category. For instance, an all-rounder may earn points for runs, a wicket, dot balls and a catch in the same match. This is why a player’s fantasy value is not identical to their batting average or bowling figures alone.

The official points tables also use bonuses and deductions to reflect the pace and impact of a performance. A fast scoring innings can attract a strike-rate bonus, while a low strike rate can result in negative points when the player has faced the required minimum number of balls. Similarly, bowlers can receive economy-rate bonuses or deductions after bowling the minimum required overs.

Batting points: runs, boundaries and milestones

In the T20 points table, every run scored earns one point. That is the foundation of batting scoring, but boundaries add substantially to the total. A boundary earns an extra four points, while a six earns an extra six points. These bonuses are in addition to the point earned for the run itself.

A batter who hits a four therefore receives five points in total: one for the run and four as the boundary bonus. A six produces seven points: one for the run and six as the six bonus. This structure gives attacking batters a route to strong returns even when they do not reach a major scoring milestone.

Milestone bonuses are not cumulative beyond the highest applicable level. A player who scores a century receives the century bonus, rather than separate 25-run, 50-run and 75-run bonuses as well. This distinction prevents readers from adding every threshold together when estimating a total.

A dismissal for a duck carries a two-point deduction in the T20 table for batters, wicket-keepers and all-rounders. The deduction applies when a player is dismissed on zero; a player who does not bat is not described as having made a duck under this rule.

Strike-rate bonuses and deductions

Strike rate measures runs per 100 balls faced. In the T20 scoring table, strike-rate points apply to players other than bowlers who have faced at least 10 balls. A strike rate above 170 earns six points, with smaller positive bonuses for lower high-scoring bands. Negative points begin for a strike rate between 60 and 70.

The relevant T20 thresholds are:

• Above 170 runs per 100 balls: +6 points
• Between 150.01 and 170: +4 points
• Between 130 and 150: +2 points
• Between 60 and 70: -2 points
• Between 50 and 59.99: -4 points
• Below 50: -6 points

This means the volume of runs is not the only batting factor. A 30-run innings can have a different fantasy effect depending on how many deliveries were used. It also explains why the format matters: the required minimum balls and strike-rate bands differ in the other tables.

If runs come from an overthrow, the runs are credited to the batter on strike. However, when an overthrow reaches the boundary, the batter does not receive an additional boundary bonus for that overthrow boundary.

Bowling points reward wickets and control

Bowling scoring recognises both wicket-taking and run control. In the T20 table, a wicket excluding a run-out earns 30 points. A bowler receives an additional eight points when the wicket is bowled or lbw. Dot balls earn one point each, while a maiden over carries a 12-point bonus.

A wicket is particularly valuable because it can combine several scoring elements. A bowler taking a batter bowled receives points for the wicket and the bowled bonus, as well as any dot-ball points accumulated across the spell. Multi-wicket hauls can add further bonuses.

The bowler also receives dot-ball points for deliveries recorded as leg byes or byes. Since these deliveries do not add to the batter’s runs, they can still reflect a delivery on which the bowler kept the scoring quiet under the fantasy-points rules.

Economy rate and the minimum-over condition

Economy-rate scoring in the T20 table applies after a bowler has delivered at least two overs. An economy below five runs per over earns six points, while higher economy bands can produce deductions. This minimum matters because one economical over alone does not qualify a bowler for the economy-rate component.

For a bowling analysis, readers can assess wickets and economy separately rather than treating them as alternatives. A bowler may take wickets but lose points for an expensive spell, or bowl economically without a wicket and still gain value through dot balls, maiden overs and economy bonuses.

The T20 economy bands award positive points below seven runs per over and deductions from 10 runs per over upwards. In other words, bowling control can materially change a player’s final points total, particularly when wicket tallies are similar.

For readers comparing expected player roles before a match, a dream 11 today match prediction can be more useful when it considers likely overs, batting position and fielding involvement rather than relying only on recent runs or wickets.

Fielding points can change the rankings

Fielding contributions are often decisive because they can arrive alongside a player’s main role. A batter who takes two catches, for example, adds 16 points to their score even before batting points are considered. In the T20 table, each catch earns eight points and a player taking at least three catches receives a further four-point bonus.

Stumpings earn 12 points. A direct-hit run-out also earns 12 points, while a run-out that is not a direct hit earns six points. The difference reflects the distinction between a fielder who alone touches the ball before breaking the wicket and a run-out involving more than one fielding touch.

When more than one fielder is involved in a non-direct-hit run-out, points are awarded only to the last two fielders who touched the ball. This avoids assigning the same run-out score to every player involved in moving the ball around the field.

Captain, vice-captain and playing points

The captain’s total is multiplied by two, while the vice-captain’s total is multiplied by 1.5. These multipliers apply to the player’s overall score, so they amplify batting, bowling, fielding and other eligible points together. A player who contributes in multiple disciplines can therefore have a larger multiplier impact than a specialist dependent on one event.

Players named in announced line-ups receive four points. A concussion substitute, X-Factor, Impact Player or full-time playing replacement who takes part receives four points in addition to eligible on-field contributions. However, an announced player who does not start the match does not score points, while the player replacing them can receive the applicable playing points.

Actions in a Super Over or Super Five do not earn fantasy points. Live totals may also change while a match is in progress or awaiting review. Once the match is marked completed and winners are declared, the stated rules say that no further adjustments are made.

Conclusion

The Dream11 points system rewards more than headline runs and wickets. Boundary hitting, dot balls, bowling economy, catches, dismissals and multiplier choices can all affect the final total. Reading the correct format-specific points table is essential, because thresholds and bonuses differ between T20, ODI, Test and other cricket formats.